Fuse Panel In Engine Compartment E-Box, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuse Panel B Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove fuse panel B. Refer to FUSE PANEL B -SB- IN ENGINE COMPARTMENT E-BOX, REMOVING AND INSTALLING .

-- Release The Clip -Arrow- And Push The Fuse Panel -2- Out Toward The Rear And Disengage It.

NOTE:

Ignore The Remaining -Items-.

-- Remove The Fuses From The Fuse Panel.

Fig 2: Releasing Clips And Removing Cover From Fuse Holder

Courtesy of AUDI OF AMERICA, LLC

-- Release Clips -Arrows- And Remove The Cover From The Fuse Panel.

-- Pull Off Retaining Strip -1- For The Connectors -Arrow- And Remove The Connectors From The Plug-In Socket

Fig 3: Pulling Off Retaining Strip

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The Exact Assignment Of The Fuse Panel In The Engine Compartment E-Box Can Be Found In The Applicable Wiring Diagram. Refer To The Appropriate Wiring Diagram(s) .