Refrigerant Circuit Connections With Valve For Switches
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Switch pressures, removing and installing switches as well as switch arrangement and version. Refer to vehicle specific refrigerant circuit. Refer to REFRIGERANT CIRCUIT - 1 , REFRIGERANT CIRCUIT - 2 , REFRIGERANT CIRCUIT 1234yf - 1 , REFRIGERANT CIRCUIT 1234yf - 2 , REFRIGERANT CIRCUIT GENERAL INFORMATION R134a , REFRIGERANT CIRCUIT R134a (Vehicle-Specific Repair Information).
- Different Threads For Switch On High Pressure And Low Pressure Sides.
- Only Valves And O-Ring Seals That Are Resistant To Refrigerant R134a And Refrigerant Oil Must Be Installed.
A - Connection (Soldered In)
B - O-Ring Seal
C - Valve (With O-Ring Seal)
NOTE:
To remove and install the valve insert -C- when the refrigerant circuit is discharged, use, for example, an adapter from the Refrigerant Sockets:T10364 (for the tightening specification. Refer to CONNECTIONS WITH SCHRADER VALVE (NEEDLE VALVE) ).