LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1196 (Air Conditioning (Front Heater & A/C Unit) (Coupe)) >> 87 Air Conditioning >> Display And Control Head >> Interior Temperature Sensor Fan, Removing And Installing >> Installing

Interior Temperature Sensor Fan, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Installation Is Carried Out In The Reverse Order While Observing The Following.

-- When installing the Interior Temperature Sensor Fan -V42-, do not press on the fan wheel -D-, but rather hold the blower firmly at the housing.

-- Turn On The Ignition.

-- Check the DTC memory for the Climatronic Control Module -J255- display and control head and erase any displayed malfunctions, if necessary using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.

scientia non olet · About LEMON Manuals