Traction Battery -A2- Inlet Air Guide, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn Off The Ignition.

-- Remove The Rear Outlet Air Guide For The Traction Battery. Refer To TRACTION BATTERY -A2- REAR OUTLET AIR GUIDE, REMOVING AND INSTALLING .

-- Remove The Front Outlet Air Guide For The Traction Battery. Refer To TRACTION BATTERY -A2- FRONT OUTLET AIR GUIDE, REMOVING AND INSTALLING .

-- Remove The Left And Right Bolts -3 And 7-, If Equipped.

Fig 1: Identifying Inlet Air Guide Components

Courtesy of AUDI OF AMERICA, LLC

-- Release The Front And Rear Tabs -8- And Remove The Inlet Air Guide -1- From The Battery Cooling Module -6-.

-- Unclip And Remove The Inlet Air Guide Carefully From The Retainers -4- On The Left -2- And Right -5- Air Guides.