Traction Battery -A2- Inlet Air Guide, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Installation Is Carried Out In The Reverse Order While Observing The Following.
NOTE:
Use a bolt -5- to attach the air guide to the battery cooling module -6- and use bolts -2 and 3- to attach the left -1- and right -4- air guides if the retainers no longer hold or if one of the tabs breaks off.
-- Clip the inlet air guide inside the battery cooling module -6- in direction of -arrow B- first, then install the left -1- and right -4- air guides in direction of -arrows A-.
-- Install The Removed Parts In The Opposite Order