Air Quality Sensor -G238- /Humidity Sensor In Fresh Air Intake Duct -G657-, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Different versions depending on the vehicle date of manufacture and A/C system version ("Basis" or "Convenience"). Refer to AIR QUALITY SENSOR -G238-, FUNCTION .

The Air Quality Sensor -G238- is only installed on vehicles with the "Convenience" A/C system.

The Humidity Sensor in Fresh Air intake Duct -G657- is only installed on vehicles from MY 2012 as a running change. Refer to AIR QUALITY SENSOR -G238-, FUNCTION .

The Air Quality Sensor -G263- /Humidity Sensor in Fresh Air intake Duct -G657- are highly sensitive electronic components that can get damaged if they come in direct contact with solvents, fuels or chemicals (for example, impurities may enter through area -A-). Therefore, never install an Air Quality Sensor -G238- /Humidity Sensor in Fresh Air intake Duct -G657- that was stored, for example, in a tool box.

Fig 1: Identifying Air Quality Sensor G238

Courtesy of AUDI OF AMERICA, LLC

Following removal, do not set down the Air Quality Sensor -G238- /Humidity Sensor in Fresh Air intake Duct -G657- in areas where it could come into contact with solvents, fuels or certain chemical compounds (liquids or vapors).

There are different versions of the Air Quality Sensor -G238- /Humidity Sensor in Fresh Air intake Duct -G657- with different functions, therefore pay attention to the correct version. Refer to the Parts Information.