LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1195 (Air Conditioning (A/C Compressor) (Coupe)) >> 87 Air Conditioning >> Actuators >> Hybrid BATTERY RECIRCULATION DOOR POSITIONING MOTOR 2 -V480-, REMOVING AND INSTALLING >> Installing

Hybrid BATTERY RECIRCULATION DOOR POSITIONING MOTOR 2 -V480-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Installation Is Carried Out In The Reverse Order While Observing The Following.

-- Install The Remaining Removed Components.

-- Turn On The Ignition.

-- After Installing, Check The DTC Memory For The Climatronic Control Module -J255- Display And Control Head And The Battery Regulation Control Module -J840- And, If Necessary, Erase The Displayed Faults Using The Vehicle Diagnostic Tester In The "Guided Fault Finding  " function.

-- Perform a function test and, if necessary, an output diagnostic test for both of the actuators on the battery cooling module via the Battery Regulation Control Module -J840- using the Vehicle Diagnostic Tester in the "Guided Fault Finding  " function.

scientia non olet · About LEMON Manuals