LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1195 (Air Conditioning (A/C Compressor) (Coupe)) >> 87 Air Conditioning >> A/C Compressor >> Drive Plate With Overload Protection, Removing And Installing >> Installing Drive Plate

Installing Drive Plate

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Position Drive Plate With Overload Protection -B- Onto Drive Plate -C-.

-- Install The Bolts -A- And Tighten By Hand.

-- Check The Drive Plate Run-Out -B-. Refer To DRIVE PLATE WITH OVERLOAD PROTECTION, CHECKING RUN-OUT AND ADJUSTING .

-- Tighten The Bolts -A- (Tightening Specification: 10 Nm  ).

-- Check The Drive Plate Run-Out -B- Once More. Refer To DRIVE PLATE WITH OVERLOAD PROTECTION, CHECKING RUN-OUT AND ADJUSTING .

scientia non olet · About LEMON Manuals