BELT PULLEY, REMOVING AND INSTALLING, A/C COMPRESSOR WITH A/C Clutch -N25-: Notes
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To Remove The Belt Pulley, It Is Not Always Necessary To Loosen The A/C Compressor From The Engine. Refer To A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET . However There May Be Not Enough Space To Remove The Belt Pulley Depending On The Engine Version. If So, Loosen Or Remove The A/C Compressor From The Engine Or Loosen The Lock Carrier From The Vehicle And Pull It Slightly Forward To Create Enough Space (Easier To Perform Depending On The Vehicle Version). Refer To appropriate service information. .
On Vehicles With A 2.0L 4-Cylinder TDI Engine And A Crossmember For The Torque Support, It Is Sensible To Remove The A/C Compressor In Order To Remove The Belt Pulley, For Example. Refer To SUBFRAME .