BELT PULLEY, REMOVING AND INSTALLING, "Denso" A/C COMPRESSOR, VERSION "2": Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

A/C COMPRESSOR WITHOUT A/C CLUTCH -N25-

NOTE:

Observe Notes On Replacing Belt Pulley. Refer To OVERVIEW - BELT PULLEY, "DENSO" A/C COMPRESSOR, VERSION "2" .

Perform Preparatory Work As For Removing Belt Pulley. Refer To PRELIMINARY WORK FOR REPLACING BELT PULLEY .

The Belt Pulley Is Made Of Plastic And Is Sensitive To Impact, Therefore Take Special Care When Handling It.

If Overload Safeguard Of Drive Plate -C- Has Triggered, Drive Plate Can Be Pried Off From Belt Pulley -D- After Removing Circlip -A-

Fig 1: Identifying Drive Plate, Belt Pulley, And Circlip

Courtesy of AUDI OF AMERICA, LLC

To Optimize Noise Reduction, A Circlip -A- With A Rubber Disc Vulcanized On It Is Installed. Refer To OVERVIEW - BELT PULLEY, "DENSO" A/C COMPRESSOR, VERSION "2" .