LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1195 (Air Conditioning (A/C Compressor) (Coupe)) >> 87 Air Conditioning >> A/C Compressor >> A/C Compressor Input Shaft, Removing And Installing >> Removing The Input Shaft

Removing The Input Shaft

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove The A/C Compressor. Refer To A/C COMPRESSOR, REMOVING AND INSTALLING .

-- Remove The Grommet -A-.

Fig 1: Identifying Boot, Drive Shaft & Drive Pinion Splines
GWWA87-0621Courtesy of AUDI OF AMERICA, LLC

-- Remove The Input Shaft -B- From Splines Of Drive Pinion -C-

NOTE:

A Clamp On The Engine Toothed Drive Gear Flange -C- Prevents The Boot -A- From Slipping.