Input Shaft, Tightening
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Hold The A/C Compressor Input Shaft -A- In Place Using A Wrench And Turn The Drive Unit -B- In Direction Of -Arrow D- (Tightening Specification:60 Nm ).
-- After Tightening The A/C Compressor Input Shaft, Check The Position Of The Grommet -E-