LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1195 (Air Conditioning (A/C Compressor) (Coupe)) >> 87 Air Conditioning >> A/C Compressor >> A/C Compressor Input Shaft, Loosening And Tightening >> Input Shaft, Loosening

Input Shaft, Loosening

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove Any Components That Prevent Access To The Input Shaft. Refer To A/C COMPRESSOR, REMOVING AND INSTALLING 

-- Hold The A/C Compressor Input Shaft -A- In Place Using A Wrench And Turn The Drive Unit -B- In Direction Of -Arrow C-.

Fig 1: Using Open-Ended Wrench To Hold Compressor Drive Shaft In Position And Turning Compressor Drive Unit
GWWA87-0622Courtesy of AUDI OF AMERICA, LLC
NOTE:

Do Not Turn The Input Shaft -A-.

Input Shaft -A- Can Be Slid Into Drive Wheel Through The Boot -E- After Loosening Threaded Connection.

After Installing The Input Shaft -A-, Check The Boot -E- Installation Position.

scientia non olet · About LEMON Manuals