A/C Pressure/Temperature Sensor -G395-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the upper lock carrier cover. Refer to LOCK CARRIER .

-- Disconnect the connector -A-.

Fig 1: Disconnecting Electrical Connector

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the A/C Pressure/Temperature Sensor -G395- -A- from the condenser connector -C-.

Fig 2: A/C Pressure/Temperature Sensor & Condenser Connector

Courtesy of AUDI OF AMERICA, LLC