A/C Pressure/Temperature Sensor -G395-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Installation is done is reverse order, observe the following:
-- Replace the O-ring -B-. Refer to REFRIGERANT CIRCUIT SEALS . For the correct allocation. Refer to the Parts Information.
-- Tighten the A/C Pressure/Temperature Sensor -G395- -A-.
- Tightening specification: 5 Nm.
-- Check the DTC memory for the Climatronic Control Module -J255- display and control head and erase any displayed malfunctions, if necessary using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.