Test Sequence:
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn on the ignition.
-- Check the ground and positive connection to the terminal -A-.
-- Check the connection and the function of the A/C Pressure/Temperature Sensor -G395- using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.
NOTE:
The A/C compressor (A/C Compressor Regulator Valve -N280-) is not actuated when the connector -A- is disconnected.
The A/C Pressure/Temperature Sensor -G395- is an electronic control module over which exchanges information with the Vehicle Electrical System Control Module -J519- via a local Data Bus using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.