Instrument Cluster Gap Cover, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Move The Steering Wheel As Far Down As Possible.
-- Unclip the gap cover -1- from the instrument panel using a Trim Removal Wedge:3409 in direction of -A arrows-.
-- Using A Small Flat-Head Screwdriver, Carefully Unclip The Gap Cover From The Upper Steering Column Switch Module Trim In Direction Of -Arrow B-.