Glove Compartment Lid, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove The Glove Compartment. Refer To GLOVE COMPARTMENT, REMOVING AND INSTALLING, VEHICLES WITHOUT KNEE AIRBAGS .

-- Remove The Hinge Pin From The Brake Component. Refer To GLOVE COMPARTMENT LID DAMPENING MECHANISM, REMOVING AND INSTALLING .

-- Set The Glove Compartment Down With The Top Side On A Soft Surface.

-- Drive The Left And Right Hinge Pins Out Using A 4 Mm Hex Socket Wrench -1- (Or Another Suitable Tool) In Direction Of -arrow-.

Fig 1: Identifying Glove Compartment

Courtesy of AUDI OF AMERICA, LLC

-- Remove Glove Compartment Cover -2- From The Glove Compartment.