Sun Shade, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install In Reverse Order Of Removal. Note The Following:
-- If Removed, Install The Rear Of The Rear Shelf -2- On The Sun Shade -1- -Arrows-, Aligning Both Parts To Each Other.
-- Insert The Sun Shade -1- With The Rear Shelf Into The Rear Shelf Mount -2- -Arrows-.
-- Tighten The Sun Shade Bolts -Arrows-.
-- Carefully Insert The Guide Strip -1- Into The Sun Shade Connecting Piece -2- In Direction Of -Arrow-.
- The Sun Shade Guide Channel Must Run Into The Guide Strip Without The Connecting Piece Being Offset.
-- Clip Guide Piece -3- At Both Retaining Hooks -2- And -4- On The Front And Rear With Connecting Piece -1-.
Fig 5: Clip Guide Strip -3- At Both Retaining Hooks -2- And -4- On Front And Rear With Connecting Piece -1
-- To Ensure The Retaining Hooks -1- Are Seated Securely, Pull Them Forward Until They Engage Completely Using An Offset Screwdriver In Direction Of -Arrow-.