Lane Change Assistance Control Module -J769- /Lane Change Assistance Control Module 2 -J770-, Removing And Installing, Coupe: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- If replacing the control module, select the "Replace control module" function for the corresponding control module on the Vehicle Diagnostic Tester.
-- Remove the rear bumper cover. Refer to REAR BUMPER .
-- Disconnect the connector -3-.
-- Remove the bolts -2- and -4-.
-- Remove the lane change assistance control module -1- from the mount on the bumper.