Headlamp Range Control Adjuster -E102-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Headlamp Light Switch Trim, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Remove the driver side instrument panel cover. Refer to STORAGE COMPARTMENTS AND COVERS .

-- Remove the bolts -arrows- and the light switch trim -1-.

-- Disconnect the connector for the Light Switch -E1-.

NOTE:

The Illustration Shows The Light Switch -E1- Removed.

-- Press the release button and disconnect the connector -1- from the Headlamp Range Control Adjuster -E102-.

Fig 2: Disconnect The Electrical Connector -1- From The Headlamp Range Control Adjuster -E102- By Pressing The Release Button

Courtesy of AUDI OF AMERICA, LLC

-- Carefully release the retaining hooks -arrows- using a small screwdriver.

-- Remove the Headlamp Range Control Adjuster -E102- -item 2- from the light switch trim.