Cigarette Lighter -U1-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following:

CAUTION:

Risk Of Injury.

After removing the Cigarette Lighter Release Tool:T40148 , check to see if the lighter retaining tabs are bent.
If the retaining tabs are bent, bend them back so the lighter does not slide out.

-- Remove the support -1- on the Cigarette Lighter Release Tool:T40148 .

Fig 1: Identifying Support, Thumbwheel, Release Tabs, Release Tool T40148 & Cigarette Lighter

Courtesy of AUDI OF AMERICA, LLC

-- Slide the piston down and hold it in place.

-- Turn the thumbwheel -4- on the Cigarette Lighter Release Tool:T40148 counter-clockwise -arrow-. While doing so, the release tabs -2- are loosened on the Cigarette Lighter -U1- -item 3- and the Cigarette Lighter Release Tool:T40148 can be removed.

-- Slide the cigarette lighter illumination ring into the mount until the clips engage.

The illumination ring can only be inserted into the mount in one position.