Overview - Interior Monitoring

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

The Interior Monitoring Transceiver Module 1 -G303- and Inclination Sensor/Anti-Theft System Control Module -J529- were combined in one component, the Anti-Theft Alarm System Sensor -G578-.
Therefore, the Comfort System Central Control Module -J393- still only has two "LIN" participants with the "anti-theft alarm system" optional equipment.

Fig 1: Ultrasonic Interior Monitoring Overview

Courtesy of AUDI OF AMERICA, LLC

Alarm Horn -H12-
- Removing and installing. Refer to Alarm Horn -H12-, REMOVING AND INSTALLING .
Nut
- 5 Nm
Nut
- 7 Nm
Alarm Horn -H12- bracket
Comfort System Central Control Module -J393-
- Removing and installing. Refer to CENTRAL LOCKING
Control Module Bracket
Antenna Amplifier
- Removing and installing. Refer to ANTENNA SYSTEMS .
  Coupe
- Antenna Amplifier 3 -R112- with Central Locking and Anti-Theft Alarm System Antenna -R47-
  Sportback
- Antenna Amplifier 2 -R111- with Central Locking and Anti-Theft Alarm System Antenna -R47-
Interior Monitoring Switch -E183- /Interior Monitoring Deactivation Switch -E217-
Coupe
- Removing and installing. Refer to Interior Monitoring Switch -E183- /Alarm System Deactivation Switch -E217-, REMOVING AND INSTALLING, COUPE .
  Sportback
- Removing and installing. Refer to Interior Monitoring Switch -E183- /Alarm System Deactivation Switch -E217-, REMOVING AND INSTALLING, SPORTBACK .
Anti-Theft Alarm System Sensor -G578-
- Removing and installing. Refer to Anti-Theft Alarm System Sensor -G578-, REMOVING AND INSTALLING .
Front Interior Lamp/Reading Lamp
Front Interior Monitoring Individual Sensor
- Can only be replaced together with the Anti-Theft Alarm System Sensor -G578-