Spring Mat, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Turn on the ignition.

-- Disconnect the battery ground cable with the ignition turned on. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove The Front Seat:

Standard seat and Sport seat (manual). Refer to FRONT SEAT, REMOVING AND INSTALLING, MANUAL .

-- Attach the front seat to the Engine/Transmission Holder - Seat Repair Fixture:VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, TWO PIECE .

-- Remove the headrests. Refer to HEADREST, REMOVING AND INSTALLING, HEADREST WITH SLIDING LOCKING MECHANISM .

-- Remove the cover with padding. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .

-- Remove the springs -A through D- from the backrest frame -1-.

Fig 1: Identifying Springs -A Through D-

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The Springs -A Through D- Can Also Stay Engaged In The Backrest Frame -1- And The Spring Mat -2- Can Be Disengaged Directly From The Springs.

-- Tip spring mat -2- forward.

Fig 2: Identifying Spring Mat And Openings For Backrest Frame

Courtesy of AUDI OF AMERICA, LLC

-- Remove the spring mat -2- from the openings -arrow- in the backrest frame -1-.