Seat Pan, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the trim on the sill side. Refer to SILL SIDE TRIM, REMOVING AND INSTALLING, BUCKET SEAT .

-- Remove the trim on the tunnel side. Refer to TUNNEL-SIDE TRIM, REMOVING AND INSTALLING, BUCKET SEAT .

-- Remove the bolt.

-- Remove the seat forward/back adjustment handle.

-- Press the control cable sleeve in direction of -arrow A- out of the control cable bracket.

Fig 1: Disengaging Actuating Link For Seat Fore/Aft Adjustment

Courtesy of AUDI OF AMERICA, LLC

-- Detach release cable -1- for seat forward/back adjustment from the release lever in direction of -arrow B-.

-- Release retaining clip -4- on the release cable in the direction of the -arrow A- and remove the retaining clamp in an upward direction -arrow B-.

Fig 2: Release retaining clip -4- on the release cable in the direction of -arrow A- and remove the retaining clamp in an upward direction

Courtesy of AUDI OF AMERICA, LLC

-- Release retaining spring -2- with a narrow screwdriver -3-.

-- Remove seat rail release lever -1- up out of the axis of rotation.

-- Remove the bolt -1- and cut the cable ties -arrows-.

Fig 3: Removing Bolt -1- And Cut Cable Ties

Courtesy of AUDI OF AMERICA, LLC

-- Free up the electrical wiring harness on the retaining plate.

-- Disconnect the connectors -2 and 4-.

-- Disconnect the pneumatic hose -3-.

-- Remove the bolts -arrows-.

Fig 4: Removing Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat pan from the seat frame.