Replacing The Upper Frame

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If The Upper Frame Is To Be Replaced, Remove The Specified Wires And Electrical And Electronic Components And Install Them In The New Upper Frame.

-- Separate the upper and lower frames. Refer to SEPARATING THE UPPER FRAME FROM THE LOWER FRAME .

-- Remove the bracket with the memory seat adjustment control module. Refer to MEMORY SEAT/STEERING COLUMN ADJUSTMENT CONTROL MODULE BRACKET, REMOVING AND INSTALLING and MEMORY SEAT/STEERING COLUMN ADJUSTMENT CONTROL MODULE, REMOVING AND INSTALLING .

-- Remove the seat height adjustment motor. Refer to SEAT HEIGHT ADJUSTMENT MOTOR, REMOVING AND INSTALLING .

-- Remove the seat angle adjustment motor. Refer to SEAT ANGLE ADJUSTMENT MOTOR, REMOVING AND INSTALLING .

-- Remove the seat position sensor:

-- Remove Wiring Harnesses And Individual Wires From Seat Pan Upper Frame.

-- Install The Removed Electrical And Electronic Components And Wires In The New Upper Frame.

Install In Reverse Order Of Removal.