Replacing The Lower Frame
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If The Lower Frame Will Be Replaced, Remove The Seat Position Sensor And Install It In The New Lower Frame.
-- Separate the upper and lower frames. Refer to SEPARATING THE UPPER FRAME FROM THE LOWER FRAME .
-- Remove The Seat Position Sensor:
- Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING, WITH PASSENGER OCCUPANT DETECTION SYSTEM SENSOR FOR BELT FASTENING DETECTION .
- Refer to SEAT POSITION SENSOR WITH PASSENGER OCCUPANT DETECTION SYSTEM FOR PASSENGER AIRBAG DEACTIVATION, REMOVING AND INSTALLING .
-- Disconnect the electrical connector on the seat forward/back adjustment motor.
-- Install the removed electrical and electronic components and wires in the new lower frame.