Overview - Seat Angle Adjuster

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Seat Pan, Seat Angle Adjuster (Manual)

Courtesy of AUDI OF AMERICA, LLC

Handle
- For seat inclination adjustment
- Removing and installing. Refer to SEAT ANGLE ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
Clip
- Replace the seat angle adjustment handle each time it is removed
- Installed position. Refer to THE SPRINGS -ARROWS- (QUANTITY: 2) ON THE CLIP -2- MUST BE ON THE INNER SIDE OF THE LEVER -1-.
Bolt
- 6.5 Nm
- Always replace
- Threaded holes for screws must always be cleaned, for example, with thread cutter
- Self-locking
Shoulder Pin
- 6 Nm
- Always replace
- Threaded holes for screws must always be cleaned, for example, with thread cutter
- Self-locking
Seat Angle Adjuster
- Removing and installing. Refer to SEAT ANGLE ADJUSTER, REMOVING AND INSTALLING .