Overview - Front Backrest, Manual Standard Seat: Notes
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Seat Pan
- Bolts
- 33 Nm
- Always replace if removed
- Threaded holes for bolts must be cleaned, for example, with a thread tap
- Self-locking
- Backrest
- Removing and installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING, STANDARD SEAT/SPORT SEAT/SUPER SPORT SEAT .
- Headrest
- Removing and installing. Refer to HEADREST, REMOVING AND INSTALLING, HEADREST WITH SLIDING LOCKING MECHANISM .
- Handle
- With bracket (entry assistance)
- Removing and installing. Refer to ENTRY ASSISTANCE HANDLE WITH BRACKET, REMOVING AND INSTALLING .
- Entry Assistance Trim
- Removing and installing. Refer to ENTRY ASSISTANCE TRIM, REMOVING AND INSTALLING, MANUAL STANDARD SEAT .
- Wiring Harness
- Running from the side airbag to the connector station.
- Depending on optional equipment, there may be more wiring harnesses, such as for backrest heating, lumbar support
- Cables
- With entry assist
- Quantity: 2
- >>Entry Assistance<< Release Cable A, Removing and Installing. Refer to ENTRY ASSISTANCE RELEASE CABLE A, REMOVING AND INSTALLING
- >>Entry Assistance<< Release Cable A, Adjusting. Refer to ENTRY ASSISTANCE RELEASE CABLE A, ADJUSTING
- >>Entry Assistance<< Release Cable B, Removing and Installing. Refer to ENTRY ASSISTANCE RELEASE CABLE B, REMOVING AND INSTALLING
- >>Entry Assistance<< Release Cable B, Adjusting. Refer to ENTRY ASSISTANCE RELEASE CABLE B, ADJUSTING