Overview - Front Backrest, Bucket Seat
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolts
- 24 Nm
- Install with locking compound. For the correct locking compound.
- Bolt
- 4 Nm
- Handle
- For seat forward/back adjustment
- Removing and installing. Refer to SEAT FORWARD/BACK ADJUSTMENT RELEASE CABLE, REMOVING AND INSTALLING, BUCKET SEAT .
- Bolt
- 24 Nm
- Install with locking compound. For the correct locking compound.
- Seat Pan
- Removing and installing. Refer to SEAT PAN, REMOVING AND INSTALLING .
- Bolt
- 20 Nm
- Install with locking compound. For the correct locking compound.
- Front Backrest
- Removing and installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING, BUCKET SEAT .
- Bolts
- 20 Nm
- Install with locking compound. For the correct locking compound.
- Pneumatic Hose
- From the module carrier with air cushions for lumbar support
- Wiring Harness
- Bolt
- 24 Nm
- Install with locking compound. For the correct locking compound.
- Seat Frame