Overview - Backrest Adjustment Motor
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Backrest Is Shown Without The Cushion, Cover And Lower Seat Frame.
- Backrest Frame
- Nut
- 6 Nm
- Always replace
- Washer
- Shaft
- The threads must be cleaned before installing the nut -2- (for example, using a thread tap).
- Coat the threads on the shaft with locking fluid before installing the nut. For the correct locking fluid.
- Bolt
- 7.5 Nm
- Always replace
- Use locking fluid when installing the bolt. For the correct locking fluid.
- Backrest Adjustment Motor
- Driver side: Driver Backrest Adjustment Motor -V45-
- Front passenger side Front Passenger Backrest Adjustment Motor -V46-
- Removing and installing. Refer to BACKREST ADJUSTMENT MOTOR AND SWITCH UNIT, REMOVING AND INSTALLING .