Memory Stop, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- If the memory stop has been replaced, clean this area of the seat rail to remove any residue of the previous memory stone.
-- Install the memory stop into the seat rail -1- by slightly tipping it toward the tunnel.
-- Engage the memory stop in the back catch -arrow-.
-- Tighten the rear seat bolt on the tunnel side -item ) OVERVIEW - FRONT SEAT, STANDARD SEAT, MANUAL - Bolts.
-- Tilt the backrest back while sliding the seat all the way back (entry assistance).
-- Release the seat forward/back adjuster and slide the front seat into the desired position.
NOTE:
It is not necessary to adjust the memory seat separately.