Backrest Release Cable, Removing And Installing, Bucket Seat: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the backrest. Refer to FRONT BACKREST, REMOVING AND INSTALLING, BUCKET SEAT .

-- Remove the backrest cover. Refer to OVERVIEW - BACKREST COVER AND CUSHION, BUCKET SEAT .

-- Unscrew the screws -arrows- at the cover.

Fig 1: Bolts On Inner Part Of Belt Guide

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover -1-.

-- Turn the cover and release the retaining tabs in direction of -arrows-.

Fig 2: Rotating Inner Part Of Belt Guide And Releasing Retaining Tabs

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover -1-.

-- Remove control cable bracket -3- for the release cables for releasing the backrest at the cover.

Fig 3: Disengaging Actuating Link In Direction Of Arrow

Courtesy of AUDI OF AMERICA, LLC

-- Remove release lever -2-.

-- Detach release cables -1- in the direction of the -arrow-.

-- Repeat work steps on opposite side.

-- Remove backrest cover and backrest frame. Refer to BACKREST COVER, REMOVING AND INSTALLING, BUCKET SEAT .

Fig 4: Backrest Cover, Backrest Frame And Screws

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -3 and 4-.

WARNING:

Danger Of Eye Injury.

Wear protective eyewear.

-- Drill out the blind rivet -2- with a 6 mm drill in backrest frame mount -1-.

-- Tip the backrest frame mount to the side and remove control cable bracket -2- for the release cables at backrest frame mount -3-.

Fig 5: Disengaging Actuating Link Eye At Backrest Lock Release Lever By Sliding Eye Forward

Courtesy of AUDI OF AMERICA, LLC

-- Disengage release cable eye -1- at release lever -4- by sliding the eye forward -arrow- and removing.

-- Remove the release cables upward out of the backrest frame.