LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1189 (SEAT FRAMES (1 Of 2) (COUPE)) >> 72 Seat Frames >> Front Seats >> Backrest Cover, Removing And Installing >> Backrest Cover, Removing And Installing, Bucket Seat >> Removing

Backrest Cover, Removing And Installing, Bucket Seat: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Apply adhesive tape -2- to the backrest shell all around trim -1-.

Fig 1: Affixing Backrest Panel All Around Trim Using Adhesive Tape
GWWA72-10149Courtesy of AUDI OF AMERICA, LLC

-- Using the Pry Lever:80-200  , pry off the upper backrest cover on the inner side, starting from the backrest shell.

-- Disengage the clip at the front edge of the backrest cover extremely carefully.

scientia non olet · About LEMON Manuals