Seat Bench/Single Seat, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Tilt the front seat backrests as far forward as possible.

-- Move the front seats as far forward as possible.

-- Remove the LATCH child seat anchor cover (quantity: 4) -1- from the anchors -2-.

Fig 1: Identifying Rear Latch Bracket Cover Caps

Courtesy of AUDI OF AMERICA, LLC

-- Reach under the seat frame with both hands on one side of the seat in direction of -A arrows-.

Fig 2: Insert Bench Seat And Press Wire Frame "Firmly" Into Grommets

Courtesy of AUDI OF AMERICA, LLC

-- Pull bench seat -1- up forcefully with both hands in direction of -A arrows- so that wire hooks -2- disengage from mounting grommet -3-.

-- Repeat the procedure on the other side in direction of -B arrows-.

-- Vehicles with seat heating: disconnect the seat heating connector

-- Remove the bench seat from the vehicle.