LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1188 (SEAT FRAMES (2 Of 2) (COUPE)) >> 72 Seat Frames >> Rear Seats >> Seat Bench/Single Seat, Removing And Installing >> Installing >> Notes

Seat Bench/Single Seat, Removing And Installing: Installing: Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The Floor Panel Into Which The Mounting Grommets Are Inserted Must Be Checked After Every Disassembly Of The Bench Seat And Be Readjusted In The Case Of Deformation.

The wire frame of the bench seat must be checked after every disassembly and be readjusted in the case of deformation.

The mounting grommets must be replaced each time the bench seat is removed.

Install In Reverse Order Of Removal. Note The Following: 

scientia non olet · About LEMON Manuals