LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1188 (SEAT FRAMES (2 Of 2) (COUPE)) >> 72 Seat Frames >> Rear Seats >> Release Cable, Removing And Installing From Connector Station Retainer >> Notes

Release Cable, Removing And Installing From Connector Station Retainer: Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The Procedure For Removing And Installing The Release Cable Is Described On The Basis Of The Left Lock To The Connector Station. Removal And Installation Is Similar On The Right Lock.

The release cable at the lock to the connector station can only be replaced with the cover and upholstery removed.

scientia non olet · About LEMON Manuals