Backrest Lock Switch Adaptation Drive/Calibration, Performing: Procedure
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Front seat installed
- Vehicle Diagnostic Tester connected
- Ignition switched on.
-- Choose "Guided Functions " in the Vehicle Diagnostic Tester.
-- Select the "control module address" (06 front passenger seat or 36 driver seat)
-- Perform the "seat axis designation".