Ribbed Belt Pulley With Freewheel, Checking: Procedure
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- The Ribbed Belt Pulley With Freewheel Is Removed. Refer To RIBBED BELT PULLEY WITH FREEWHEEL, REMOVING AND INSTALLING .
-- Hold The Inner Ring -2- On The Ribbed Belt Pulley With One Hand Using The Thumb And Index Finger And The Outer Ring -1- With The Other Hand Using The Thumb And Index Finger.
-- Hold The Inner Ring Tight And Turn The Outer Ring In The Rotation Direction Of The Generator.
- If The Free-Running Hub Is Intact, The Outer Does Not Turn.
-- Hold The Inner Ring Tight And Turn The Outer Ring Opposite The Rotation Direction Of The Generator.
- If The Free-Running Hub In Intact, The Outer Ring Turns With Slight Resistance.
Replace The Ribbed Belt Pulley If The Free-Running Hub Does Not Function As Described.