Right Flange Shaft, Removing And Installing: Installing
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
NOTE:
Replace the circlip after removing.
-- Insert the circlip -1- with the :VAS5503A .
-- Check the right flange shaft seal for damage and replace if necessary.
-- Fill the space between the sealing/dust lip halfway with Sealing Grease :G 052 128 A1 .
-- Insert the right flange shaft.
-- Fill the transmission fluid and check the fluid level. Refer to TRANSMISSION FLUID, DRAINING AND FILLING [For engine(s) CYNB, CPNB .