Center Differential Ball Bearing, Replacing
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Press Plate :VW401
- Press Plate :VW402
- Press Piece - Multiple Use :VW412
- Press Piece - Bushing - 50mm Diameter :VW432
- Bearing Installer - Carrier Bearing :3350
- Splitter :VAS251411
-- Remove the center differential housing. Refer to CENTER DIFFERENTIAL, REMOVING AND INSTALLING .
-- Remove the center differential -1- from the output shaft.
-- Removing the ball bearing from the center differential
A - :VAS251411
- The :VW432 faces the ball bearing.
-- Installing the ball bearing onto the center differential