LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1042 (Exterior System (Hood & Lids - Service Information)) >> 55 Hood, Lids >> Rear Lid >> Rear Lid, Adjusting >> Rear Lid, Adjusting, Adjusting Buffer, AVANT >> Installing the Stop

Installing the Stop

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA55-10459Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolt -1- to the tightening specification when installing the stop -2-. Refer to -item  3- Bolt (8 Nm).

-- Height adjustment is performed using the adjusting buffers on the body side.

scientia non olet · About LEMON Manuals