LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1042 (Exterior System (Hood & Lids - Service Information)) >> 55 Hood, Lids >> Hood >> Overview - Hood >> Overview - Hood, Gas-Filled Strut

Overview - Hood, Gas-Filled Strut

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Hood Gas-Filled Strut
GWWA55-10760Courtesy of AUDI OF AMERICA, LLC
  1. Gas-Filled Strut
    • Lift the locking spring slightly and pull the gas-filled strut off the ball stud.
      NOTE:

      Ensure correct positioning during installation: the gas-filled strut tube must be engaged on the lid side.

  2. Hood
  3. Suspension Strut Tower
  4. Ball Stud
    • 21 Nm
scientia non olet · About LEMON Manuals