Clutch Switch
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Move the clevis pin of push rod to left and right, retain it at the position where it moves smoothly, and measure the clutch pedal stroke.
Clutch pedal full stroke A:
130 - 135 mm (5.12 - 5.31 in)
Tightening torque:
T: 8 N.m (0.8 kgf-m, 5.9 ft-lb)
- If the clutch pedal stroke is out of specification, adjust the stroke. < Ref. to ADJUSTMENT , Clutch Pedal . >
- Connect the clutch switch connector.