Overview - Bumper Cover, Except AUDI RS5: Notes
- Trim Strip
- Audi S5 only
- Removing and installing. Refer to Installing .
- Bolt
- 1.5 Nm
- Quantity: 9
- Bumper Cover Lower Section
- Removing and installing. Refer to ATTACHMENTS, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .
- Bolt
- 1.5 Nm
- Quantity: 2
- Rear Bumper Cover
- Removing and installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Left Rear Parking Aid Sensor -G203-
- Removing and installing. Refer to PARKING AID .
- Bolt
- Quantity: 3
- Tightening sequence. Refer to SIDE MOUNT AND BUMPER COVER LOCKING MECHANISM - TIGHTENING SPECIFICATIONS AND SEQUENCE
- Side Mount
- For the bumper cover
- Removing and installing. Refer to BUMPER GUIDE PIECES, REMOVING AND INSTALLING .
- Clip nut
- Quantity: 3
- Bumper Cover Locking Mechanism
- Clamping screw tightening specification 2.5 Nm
- Removing and installing. Refer to Installing .
- Clip Nut
- Quantity: 2
- Bolt
- Quantity: 2
- Tightening sequence SIDE MOUNT AND BUMPER COVER LOCKING MECHANISM - TIGHTENING SPECIFICATIONS AND SEQUENCE
- Nut
- 4 Nm
- Left Rear Center Parking Aid Sensor -G204-
- Removing and installing. Refer to PARKING AID .
- Right Rear Center Parking Aid Sensor -G205-
- Removing and installing. Refer to PARKING AID .
- Nut
- 4 Nm
- Right Rear Parking Aid Sensor -G206-
- Removing and installing. Refer to PARKING AID .
- Cap
- For the towing eye
- Bolt
- Quantity: 3
- 1.5 Nm