Impact Member Mount, Removing And Installing, Vehicles Through My 2011: Removing
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .
-- Remove the impact member. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2011 .
-- Remove the headlamp washer system spray nozzle. Refer to WINDSHIELD WASHER SYSTEM .
-- Mark the installation position of the mount to the lock carrier for installation later.
-- Remove the bolts -arrows-.
-- Remove the locating bolt -1-.
-- Tip the impact member mount -2- on the lock carrier out and remove it.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .
-- Remove the impact member. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2011 .
-- Mark the installation position of the mount to the lock carrier for installation later.
-- Remove the bolts -arrows-.
-- Remove the locating bolt -1-.
-- Remove the impact member mount -2- on the lock carrier.