Impact Member Mount, Removing And Installing, Vehicles Through My 2011: Installing

• Tightening specification. Refer to OVERVIEW - IMPACT ABSORBER, VEHICLES THROUGH MY 2011 .

Install in reverse order of removal. Note the following: 

-- Tighten the impact member mount according to the marking made during removal.

-- Install the headlamp washer system spray nozzle. Refer to WINDSHIELD WASHER SYSTEM .

-- Install the impact member. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2011 .

-- Install the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .

Right Mount 

• Tightening specification. Refer to OVERVIEW - IMPACT ABSORBER, VEHICLES THROUGH MY 2011 .

Install in reverse order of removal. Note the following: 

-- Tighten the impact member mount according to the marking made during removal.

-- Install the impact member. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2011 .

-- Install the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .