Impact Member Mount, Removing And Installing, Vehicles From My 2012: Removing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the impact member. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES FROM MY 2012 .

-- Remove the headlamp housing mount. Refer to HEADLAMPS .

-- Mark the installation position of the mount to the lock carrier for installation later.

-- Remove the bolts -arrows-.

-- Remove the nut -1-.

-- Tip the impact member mount -2- on the lock carrier out and remove it.