Impact Member Mount, Removing And Installing, Vehicles From My 2012: Installing

• Tightening specification. Refer to OVERVIEW - IMPACT ABSORBER, VEHICLES FROM MY 2012 .

Install in reverse order of removal. Note the following:

-- Tighten the impact member mount according to the marking made during removal.

-- Install the headlamp housing mount. Refer to HEADLAMPS .

-- Install the impact member. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES FROM MY 2012 .

-- Install the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .