Bumper Cover, Removing And Installing, Except AUDI RS5: Removing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bumper cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Disconnect the electrical connector -2- for the Outside Air Temperature Sensor -G17- and the electrical connector -1- for the front parking aid sensor.

-- Remove the bolt -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2- and the quick-release coupling -1- on the front bumper noise insulation.

-- Remove the wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER, EXCEPT AUDI RS5 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the electrical connector -1- on the fog lamp.

-- Remove the bolts -arrows-.

-- Disengage the side walls on the front side panel and remove the bumper cover forward.